Bolts
The following Chute Hoists can be anchored to concrete slabs with our factory approved Anchor Bolts:
- Bolt Down Frame Models SC-250-bd, SC-500-bd, SC-750-bd, SC-1000-bd, SC-1500-bd
- Hoister Models SC-610-cb, SC-900-cb, SC-2000-cb
Accessories
| Anchor Type | Expansion |
| Model | HSL-3 M12/50 |
| Code | 371782 |
| Usable Length | 5.75″ |
| Max Fixture Thickness | 2″ |
| Drill Bit | 18 mm |
| Min. Slab | 6.25″ |
| Min Hole Depth | 4.25″ |
| Socket | 19 mm |
| Torque | 80 ft lb |
| Reusable | No |
Click here for technical information.
| Anchor Type | Expansion |
| Model | Powers Bolt+ |
| Code | 6945SD |
| Usable Length | 6.125″ |
| Max Fixture Thickness | 2.25″ |
| Drill Bit | 5/8″ |
| Min. Slab | 6.5″ |
| Min Hole Depth | 4.25″ |
| Socket | 3/4″ |
| Torque | 60 ft lb |
| Reusable | No |
Click here for technical information.
| Anchor Type | Thru-Bolt |
| Model | SC-TB-17 |
| Code | Ø 3/4″ |
| Usable Length | 17″ |
| Drill Bit | 7/8″ |
| Min. Slab | 6″ |
| Hole Depth | 5″ |
| Socket | 1-1/8″ |
| Torque | n/a |
| Reusable | Yes |
| Anchor Type | Thru-Bolt |
| Model | SC-TB-35 |
| Code | Ø 3/4″ |
| Usable Length | 35″ |
| Drill Bit | 7/8″ |
| Min. Slab | 6″ |
| Hole Depth | 5″ |
| Socket | 1-1/8″ |
| Torque | n/a |
| Reusable | Yes |
Superchute® Thru-Bolts
- Can be used if the floor is not suitable for expansion
- Yellow zinc plated ¾” dia. threaded rod
Hex head & flat washer are welded to the top of the rod then painted.
Backing plate, flat washer, lock washer, 2 hex nuts & warning cap with label loop.
| Part # | Description | Weight |
| SC-TB-20 | Pair of ¾" diameter thru-bolts: 20" length | 8 lb. |
| SC-TB-40 | Pair of ¾" diameter thru-bolts: 40" length | 12 lb. |
Use a torque wrench to ensure proper installation of the expansion bolts that secure Hoists and Concrete Anchors.
Specifications:
- Made by Armstrong® Tools in the USA
- Model No. 64-407
- Large Dial provides readings in Foot Pounds & Newton Meters
- Drop Forged ½” drive
- Has ratchet head
- Has memory needle
- Includes protective case
- Lifetime Guarantee
Installation Specs for HILTI® Expansion Bolts (Metric Size)
| Model | Bolt Length* | Use to Secure | Drill Bit | Socket | Torque | Hole Depth |
| HSL M12/50 | 146 mm (5.75") | Hoist | 18 mm | 19 mm | 80 Nm - 60 ft-lb. | 105mm - 4.25" |
| HSL M12/25 | 120 mm (4.5") | Concrete Anchor | 18 mm | 19 mm | 80 Nm - 60 ft-lb. | 115mm - 4.5" |
Installation Specs for Power-Bolt™ Expansion Bolts (Imperial Size)
| Model | Bolt Length* | Use to Secure | Drill Bit | Socket | Torque | Hole Depth |
| 6945 | 6" | Hoist | 5/8" | 3/4" socket | see note | 4.5" |
| 6942 | 4" | Concrete Anchor | 5/8" | 3/4" socket | see note | 4" |
[simple_tooltip content=’*Bolt Length is measured here as the usable length, therefore Bolt Length does not include the head.’]*Bolt Length[/simple_tooltip]
Installation
