Chute Sections

Home > Chute Systems  > Construction Chutes > Chute Sections

Chute Sections

Let gravity do the work!

Superchute® Construction Chutes are available in 2 designs – Wraparound® & Welded.
Offered in a wide range of diameters.

Information
  • Equipped with safe and strong cable linking hardware
  • Light, flexible & safe
  • Quiet during use
  • Ideal for roofers, scaffolders, contractors, masons, renovators, supply houses & rental stores
  • Chute sections are conical tubes 48″ (1.2 m) in height
  • The working length of each section is 40″ (1 m)
  • 8 inch (20 cm) overlap when linked together
  • Tight fit: 1 inch taper minimizes airborne dust
  • Equipped with a safe and strong cable system
  • Custom diameters available
  • Standard diameters for Top Hopper, Regular, and Door sections are listed below
    Imperial 18″ 23″ 27″ 30″ 33″ 36″
    Metric 450 mm 585 mm 685 mm 760 mm 840 mm 915 mm

Superchute® can provide free and helpful sketches within 24 hours.
  • Provides a clear drawing of the chute on the building
  • Shows the precise quantity of chute sections needed for the job
  • Shows how to achieve proper door positioning
  • Recommends the appropriate support frame
  • Click here to fill out the form

The following information is stamped front and back with 11″ x 5″ die onto every chute section:

Fire Warning
General Warning
Custom Branding Plate
  • Company name and coordinates
  • Chute description
  • Month & year of manufacture
  • Plastic thickness
  • Chute diameter
  • Chute weight
  • Detailed instructions & fire warning
  • Excellent advertising tool & great anti-theft measure
  • We keep your plate in our library for future orders
  • There is a small charge for making the die. Please allow 24 hours for preparation.

    Click here to read more about Chute Parts.

    brochure-chute-4sides-1
    Welded Design
    WELD-CHUTE-YELLOW
    WELD-CHUTE-BLUE
    • No assembly required
    • Permanent tubes with a welded seam
    • Sections stack like cups for easy transport and storage
    • Fully compatible with all Wraparound® chute sections
    • The uppermost section
    • One needed per chute system
    • Entry point for debris
    • Heavy duty construction
    • Tube section
    • No assembly required
    • A system consists mostly of these pieces
    • Entries for multi-level work
    • Any number per system
    • Heavy duty construction
    • Adjust height using Superchute® Lanyards
    Diameter (imperial)18"23"27"30"33"36"
    Diameter (metric)450 mm585 mm685 mm760 mm840 mm915 mm
    Weights:
    Top Hopper24 lb29 lb38 lb43 lb47 lb56 lb
    Regular Section21 lb28 lb35 lb37 lb43 lb46 lb
    Door Section31 lb36 lb46 lb52 lb63 lb68 lb
    Wraparound® Design
    WRAP-FULL-YELLOW
    WRAP-FULL-BLUE
    wrap
    • They go flat!
    • Minimal storage space required
    • A safe and simple closure system
    • Opened chutes stack like sheets of plywood
    • Easy to transport in pick-up trucks
    • Fully compatible with all Welded sections
    • The uppermost section
    • One needed per chute system
    • Entry point for debris
    • Heavy duty construction
    • Tube section
    • No tools required to close the clasp
    • A system consists mostly of these pieces
    • Entries for multi-level work
    • Any number per system
    • Heavy duty construction
    • Adjust height using Superchute® Lanyards
    wrapscrated
    • Superchute Wraparounds® leaving the factory are very well crated
    • 9 opened Regular Sections and 1 Welded Top Hopper (30′ of chute) can fit inside a pick-up truck
    wraptruck
    Diameter (imperial)18"23"27"30"33"36"
    Diameter (metric)450 mm585 mm685 mm760 mm840 mm9165 mm
    Weights:
    Top Hopper28 lb30 lb40 lb46 lb53 lb60 lb
    Regular Section21 lb28 lb35 lb37 lb43 lb46 lb
    Door Section35 lb40 lb47 lb56 lb65 lb70 lb
    Wraparound® Step 01
    Wraparound® Step 02
    Wraparound® Step 03
    Wraparound® Step 04
    • Assembly of a Regular Wraparound section:
    • Use the 5 supplied eyebolts
    • No tools required
    • Hand tighten only
    • Pass the red bungee cord through each eyebolt to prevent the eyebolts from spinning out over time
    • When storing the section as a flat panel, connect the 5 loose eyebolts to the cable hook to prevent their loss
    Materials
    • Most Superchute® sections are made of YELLOW High Molecular Weight Polyethylene
    • HMWPE is resistant to abrasion, chemicals and cold weather
    • Clients in Alaska & other cold climates appreciate its low temperature impact resistance of -100 ºC (-156 ºF)
    • In hot weather the plastic will become a little softer
    • Bright yellow plastic (safety-minded color) shows off your company name plate
    • Many thicknesses available
    • UV treated
    SC-WELD5-30-ORTHO
    • Wraparound® Black Fire Retardant UHMWPE Plastic Sections
    • Fire retardant chutes for Boston, New York, nuclear power plants, mines, military
    • More abrasion resistant and durable than yellow plastic, aluminum or steel
    • Acceptable working temperature between -100°C to 80°C (-148°F to 176°F)
    • 1/4″ Wall thickness – dent resistant wall for very little weight
    • Low noise during use
    • Fire hazard warning on each section
    • Available in any diameter
    • See Fire Rated Chutes for more information
    Black FR Regular Section
    • We build custom Superchute® sections using BLUE Ultra High Molecular Weight Polyethylene for large quantities of abrasive materials
    • UHMWPE is five times more abrasion resistant than the yellow plastic
    • Low temperature impact resistance: -70 ºC (-94 ºF)
    • Melting temperature: 137 ºC (280 ºF)
    • Max recommended working temperature: 80°C (180°F)
    • Many thicknesses available
    • UV treated
    • We build custom Superchute® sections using GREY Ultra High Molecular Weight Polyethylene for extremely hot materials
    • UHMWPE is five times more abrasion resistant than the yellow plastic
    • Low temperature impact resistance: -70 ºC (-94 ºF)
    • Melting temperature: 150 ºC (300 ºF)
    • Max recommended working temperature: 135°C (275°F)
    • Primarily designed for carrying hot asphalt in truck beds
    • Many thicknesses available
    • UV treated
    • 18 gauge non-combustible galvanized sheet metal
    • Sections lay flat for storage & transport
    • Kickboard & Finger Flaps for the entry sectionss are made of plastic
    • Galvanized steel and hard aluminum metal chute sections are also available. Please visit our Fire Rated Chutes page for more details.
    Galvanized Regular Section

    HDPE (OTHER COMPANIES)0%

    HMWPE (Superchute®)0%

    ALUMINUM0%

    CARBON STEEL0%

    UHMWPE (CUSTOM PLASTIC BY SUPERCHUTE®)0%

    Larger the number = Longer the life

    Projects

    Click on the images to view projects.

    ';
    Chute Hoists, Chute Sections, Construction Chutes, Custom Top Hoppers & Funnels, Roofer Hoists
    ';
    Chute Sections, Custom Top Hoppers & Funnels
    ';
    Chute Hoists, Chute Sections, Scaffold Hoists
    ';
    Chute Sections, Construction Chutes
    ';
    Bolt Down Frames, Chute Hoists, Chute Sections, Construction Chutes
    ';
    Bolt Down Frames, Chute Hoists, Chute Sections, Chute Systems, Construction Chutes
    ';
    Bolt Down Frames, Chute Hoists, Chute Sections, Construction Chutes
    ';
    Chute Hoists, Chute Sections, Construction Chutes