Black Tight Weave Scafnet

YarnMesh DiameterWeightShadeBurst Strength
Polyethylene1/16"4.25 oz/sq.yd.40%97 psi
ModelColorsDimensions (imperial)Dimensions (metric)lb/roll
SCAF2M50-BKBlack6.1’ x 164’ = 1,000 ft21.85 m x 50 m = 92.5 m240 lb
SCAF4M50-BKBlack12.2’ x 164’ = 2,000 ft23.7 m x 50 m = 185 m260 lb
SCAF8M50-BKBlack26’ x 165’ = 4300 ft28 m x 50 m = 400 m2120 lb
  • Fine black mesh provides excellent debris & dust control 
  • Provides more shade 
  • Catch light debris falling from scaffolds, bridges & buildings under construction 
  • Hundreds of rolls in stock at all times available for immediate shipment 
  • Many sizes available 
  • Each roll is individually bagged 
  • Reinforced yellow borders
  • Extra wide nets – often used under bridges
  • Passes NFPA 701-2004 Test Method 2 – Flame Propagation
  • All Scafnet® models can be quickly cut to size without fraying
  • Disposable nylon quick-ties allow for rapid Scafnet installation
  • Install bands of Scafnet® from top-to-bottom or left-to right
TestTest TypeBlack Net
1Mesh Breaking Strength (length)83 lb.
Mesh Breaking Strength (width)80 lb.
Elongation at break (length)50%
Elongation at break (width)98%
2Yarn Breaking Strength4 lb.
3Burst Strength97 psi
4Wounded Burst Strength44 psi

Description of Tests

  1. Breaking Strength of Fabrics (Grab Method: CAN/GSB-4.2 Method 9.2-M90). A 4″ wide x 6″ tall specimen of fabric is held between 2 vertical clamps. Tension is applied so that rupture of the specimen occurs within 20 seconds. This test is similar to ISO 5082:1982.
  2. Breaking Strength of Yarns (Single Strand Method: CAN/GSB-4.2 Method 9.4-M91). A single strand of yarn is held between 2 clamps. Tension is applied so that rupture of the specimen occurs within a specified interval of time.
  3. Burst Strength (Diaphragm Pressure Test: CAN/GSB-4.2 Method 11.1-94). A fixed area of fabric is subjected to pressure on one side through a diaphragm, and the pressure is gradually increased until the fabric is ruptured. This test is technically equivalent to ASTM D 3786-87.
  4. Wounded Burst Strength (Diaphragm Pressure Test: CAN/GSB-4.2 Method 11.1-94). Same as previous except a 12.5 mm cut is made to the test area.

Detailed test reports are available for all nets.


Click on the images to view projects.