RampRail™

Information
  • RampRail™ consists of 1 Lever Post, 1 Anchor Post, 2 x 4” wide orange Polyester Rail Member Webbing Straps 
  • Warning! Fall Hazard Area marked on all rail member straps 
  • 2 lever-actioned strap hooks allow for instant tensioning of the straps without requiring ratchets 
  • Customized solution designed & fabricated to meet your requirements

 

  • Straps hang off plastic hangers when the gate is opened
  • Used for short 10’ spans – intermediate stiffening posts are not required
  • Designed for low height installation – toeboard for falling object protection not required
  • In stock for immediate delivery anywhere in the world
  • A structural engineer must verify the adequacy of the supporting structure prior to each installation

Superchute® can provide free and helpful sketches within 24 hours.

A Site Sketch :

  • Shows a clear image of RampRail™ on the jobsite
  • Shows how to achieve proper positioning
  • Recommends the appropriate parts
  • Contact us for your custom site sketch

StrapRail® complies with:

  • Full compliance with US Federal OSHA Standard 1926.502 “Fall Protection” – click here for more information
  • Cal/OSHA (horizontal load of 20 pounds per lineal foot at the top rail)
  • Ontario’s Occupational Health and Safety Act, REGULATION 213/91 FOR CONSTRUCTION PROJECTS Section 26.3(5) (point load of 150 pounds applied to every 8 feet of guardrail at the top rail equivalent to 19 lb per linear foot)
  • Quebec’s CCST Safety Code for the Construction Industry, 3.8.3

Other guardrails:

  • Temporary guardrails are usually constructed of wood, steel or wire rope with netting & not usually tested after installation
  • Workers & safety inspectors do not deliberately lean on these barriers since they suspect the guardrail could fail
  • Wood guardrails are costly to build and the lumber is scrapped at the end of the job
  • Steel guardrails are heavy and require ample storage space
  • Wire rope guardrails are often slack which allows the top rail wire to deflect below the OSHA minimum height of 39″

 

StrapRail® Strap Kit

  • Installed StrapRail® System is under continuous self-test with considerable tension on the straps & anchors
  • Fully tensioned state proves anchors have been correctly installed & that the railing is safe for use
  • No other temporary guardrail system offers this self test benefit
  • Workers & safety inspectors can deliberately lean on our system without fear of falling
  • StrapRail® is fully engineered, lightweight & reusable for many years
  • It is compact and easily transportable or shipped
  • We can quote & manufacture customized systems for your needs
Parts

Anchor Posts (Bolt Down) are made from heavy duty galvanized steel.

StrapRail® Railstrap

StrapRail® Rail Straps

  • Webbing woven in Canada using UV resistant yarn for a 10 year projected life
  • Straps are sewn on our computerized sewing machine
  • Embedded with RFID chip
  • Straps have velcro sewn on to secure a reel of strap
Anchor Bolts

HUS-KH-EZ

Anchor TypeScrew
ModelKH-EZ 5/8″ x 5 1/2″
Code418080
Usable Length5.5"
Minimum Embedment5″
Drill Bit5/8"
Min. Slab7"
Hole Depth6"
Socket15/16"
Torque85 ft.lb
Max Impact Wrench Torque in concrete450 ft.lb
ReusableNo

 

Click here for technical information.

Anchor TypeExpansion
ModelHSL-3 M12/25
Code371781
Usable Length4.75″
Max Fixture Thickness1″
Drill Bit18 mm
Min. Slab6.25″
Min Hole Depth4.25″
Socket19 mm
Torque80 ft lb
ReusableNo

 

Click here for technical information.

Anchor TypeExpansion
Code284908
Usable Length3″
Drill Bit18 mm
Min. Slab6″
Hole Depth5″
Socket19 mm
Torque60 ft lb
ReusableYes (removable threaded stud

 

Click here for technical information.

Anchor TypeThru-Bolt
CodeØ 3/4″
Usable Length17″
Drill Bit7/8″
Min. Slab6″
Hole Depth5″
Socket1-1/8″
Torquen/a
ReusableYes (removable threaded stud

 

Click here for technical information.

Anchor TypeThru-Bolt
CodeØ 3/4″
Usable Length35″
Drill Bit7/8″
Min. Slab6″
Hole Depth5″
Socket1-1/8″
Torquen/a
ReusableYes (removable threaded stud

 

Click here for technical information.

TE-40

  • Maximum working comfort thanks to innovative, perfectly balanced design with ergonomic D-grip
  • Extremely wide range of applications thanks to rapidly interchangeable chucks
  • With this you can drill a 5/8″ diameter hole 6″ deep in concrete in 20 seconds
  • Use a Ferro detector such as a Hilti PS 35 – it locates rebar in a concrete slab, and shows the depth of any rebar steel as well

Click here for technical information.

Projects

Click on the images to view projects.

Fall Protection, Guardrails, RampRail™, StrapRail®